Compacted Expansive Elastic Silt and Tyre Powder Waste

Building on/with expansive soils with no treatment brings complications. Compacted expansive soils specifically fall short in satisfying the minimum requirements for transport embankment infrastructures, requiring the adoption of hauled virgin mineral aggregates or a sustainable alternative. Use of hauled aggregates comes at a high carbon and economical cost. On average, every 9m high embankment built with quarried/hauled soils cost 12600 MJ.m-2 Embodied Energy (EE). A prospect of using mixed cutting-arising expansive soils with industrial/domestic wastes can reduce the carbon cost and ease the pressure on landfills. The widespread use of recycled materials has been extensively limited due to concerns over their long-term performance, generally low shear strength and stiffness. In this contribution, hydromechanical properties of a waste tyre sand-sized rubber (a mixture of polybutadiene, polyisoprene, elastomers, and styrene-butadiene) and expansive silt is studied, allowing the short- and long-term behaviour of optimum compacted composites to be better established. The inclusion of tyre shred substantially decreased the swelling potential/pressure and modestly lowered the compression index. Silt-Tyre powder replacement lowered the bulk density, allowing construction of lighter reinforced earth structures. The shear strength and stiffness decreased on addition of tyre powder, yet the contribution of matric suction to the shear strength remained constant for tyre shred contents up to 20%. Reinforced soils adopted a ductile post-peak plastic behaviour with enhanced failure strain, offering the opportunity to build more flexible subgrades as recommended for expansive soils. Residual water content and tyre shred content are directly correlated; tyre-reinforced silt showed a greater capacity of water storage (than natural silts) and hence a sustainable solution to waterlogging and surficial flooding particularly in urban settings. Crushed fine tyre shred mixed with expansive silts/sands at 15 to 20 wt% appear to offer the maximum reduction in swelling-shrinking properties at minimum cracking, strength loss and enhanced compressibility expenses

Stabilisation of peat with colloidal nano and micro silica

Peat occurs abundantly in wetlands across Iran, particularly around the disappearing Urmia Lake. Conventional chemical stabilisation has been widely used to tackle the high compressibility and shrinkage potential of peat. Whilst effective, this generally reduces the carbon storage capacity of peat. Exotic stabilisers such as nano-silica (NS) have been shown to be relatively less harmful and without any direct environmental risk. NS has proved effective in improving the mechanical properties (to some extent) and pH-dependent natural structure of peat, but is commercially nonviable. This article presents findings from an experimental study of Urmia Lake peat stabilised with composites of NS and cheaper micro-silica (MS). Unconfined compressive strength (UCS) and California Bearing Ratio (CBR) tests were conducted on untreated and treated compacted natural peat soil samples after 7, 14 and 28 days of curing. Nano-silica was varied from 3 % to 9 % (by dry mass) in 3 % increments and micro-silica was varied from 6 % to 24 % (by dry mass) in 6 % increments. The observations are explained in terms of micro-scale events using XRF spectroscopy and SEM imaging. The findings suggest that the UCS of peat can be increased by administration of NS-MS composites, and the effectiveness is dependent on the relative content and particle size of NS and MS. The UCS and elasticity modulus increase with curing time. As manifested in the CBR results, administration of the composites improves the bearing capacity of peat and transforms it into a sub-base with suitable engineering functions whilst safeguarding its ecosystem service provisions

Anisotropy in Sand–Fibre Composites and Undrained Stress–Strain Implications

Among the plethora of studies on anisotropy in fibre-reinforced sands, there exist conflicting views on effects on the steady-state deformations of initial packing. These conflicting views are further confused by strictly limited experimental evidence on flow in complex loading environments where the principal stresses rotate whereby shearing and torsional stresses combine, and when extension in soil relieves the compressive stresses. In the heuristic of intrinsically anisotropic nature of the soil and in recognition of the inability of placement methods to overcome such anisotropy, this paper aims to use the orientation of principal stress and soil initial packing state combined as proxy parameters to further the knowledge of plastic behaviour in fibre-reinforced sands. This study furthers the knowledge of the dependency of steady states on anisotropy in composite geomaterials. In doing so, the direction of principal stress orientation is varied from 15° to 60° (from vertical axis), taking an intermediate principal stress ratio of 0.5 and 1.0 and two initial confining pressures. Twenty-four undrained torsional shear tests are conducted using a hollow cylindrical torsional shear apparatus. Under compression and plain strain conditions, torsional stresses limit the improvements in soils’ undrained shear strength upon fibre reinforcement. Extension in soil remarkably increases fibres’ contribution to betterment of undrained strength. Fibres are least effective under low isotropic confining pressures and also for certain ranges of torsional stresses

Stabilisation of peat with colloidal nanosilica

Colloidal nanosilica hydrosols are electrochemically stabilised polymerised amorphous silica in low viscosity suspensions. They have no known adverse impact on soil health and ecosystem service functions, thereby having a scope for use in groundworks as an alternative low-viscose stabilising material. Six grades of colloidal nanosilica are synthesised through an in-house procedure and introduced to a natural peat soil. The peak and residual compressive strength of compacted and modified soils are measured immediately after treatment and in four strain levels post treatment. Findings suggest that, despite the direct correlation between the nanosilica content and compressive strength, an increase in nanosilica content does not necessarily offer stability at larger strains. This is a major limitation. The particle-level kinematics in modified peat is discussed to gain a new insight into the role played by silica flocs on the build-up of macro-mechanical quantities such as peak and critical state strength. Overall, modification of peat with nanosilica leads to improvements in strength and formation of composites with generally more dilative behaviour. When used as a single stabiliser, a design 15 % to 20 % grade nanosilica solution yields a reasonably high strength although precautions against excessive straining of modified peat soils need to be taken in the first seven days post treatment. At this optimum grade, the loss of strength on further straining is capped to 9 % at plastic strains 1.5 times the peak strain

Fractals for the Sustainable Design of Engineered Particulate Systems

The engineering properties of particulate materials are the collective manifestation of interactions among their constituent particles and are structures within which particles adopt their spatial arrangement. For the first time in the literature, this paper employs an extended concept of ‘fractals’ to show that materials constituting particles of a certain size can be rationalized in three universal fractals. Within each fractal, materials build repeatable, reproducible, and predictable traits, and exhibit the stress-strain behaviors of nondifferentiable, self-similar trajectories. We present experimental evidence for such repeatable traits by subjecting six different particulate materials to static undrained isotropic, static undrained anisotropic, and cyclic undrained isotropic stresses. This paper shows that universal fractals are associated with fractal structures; herein, we explore the matters that influence their spatial arrangement. Within the context of sustainable design, ways of engineering natural particulate systems to improve a product’s physical and hydromechanical properties are already well established. In this review, a novel extended concept of fractals is introduced to inform the biomimetic design of particulate systems, to show how biomimicry can benefit in preserving general behavioral traits, and how biomimicry can offer predicated forms, thereby enhancing the design efficiency. To pursue such an ideal, processes that lead to the engineering of natural materials should not compromise their loyalty to the parent universal fractal

Liquefaction resistance of fibre-reinforced silty sands under cyclic loading

Whether the so-called double porosity in soils with a loose and natural packing state is a concept with real-world implications is a fundamental yet controversial question in the study of cyclic undrained shear behaviour of fibre-reinforced silty sands. An attempt is made here to clarify the question by means of particle-level modelling combined with 41 undrained cyclic triaxial shear tests. The study shows that the initial Random Loose Packing changes to Random Close Packing and then Close Packing with silt content increments. The transition from random to close packing occurs at a threshold silt content which is relatively lower in coarser sands. For sands with 40% silt content. Irrespective of fine content, fibres tend to sit deep into the silt pellets and encrust the macro-pore spaces. Generally, increasing fibre content leads to an increase in the average number of contacts per particle, dilation and easier dissipation of excess pore water pressure, a decrease in contact forces and improved liquefaction resistance. For sands with >40% silt content, effectiveness of fibre reinforcement diminishes with increasing sand median size

Stabilization of Sand with Colloidal Nano-Silica Hydrosols

Colloidal nano-silica (NS) hydrosols are electrochemically stabilized, polymerized amorphous silica in low viscosity solutions, and in the form of hydrated gels, silica globules or pellicles. Compared to applications in concrete technology, the use of silica-based binders for groundwork applications has received little attention. Silica-based hydrosols impose no known direct risks to humans and are generally courteous to the soil health and ecosystem service functions. Their localized impact on microorganisms however needs to be further investigated. To this end, NS hydrosols have a scope for use as an alternative low-viscose material in groundworks. The current understanding of interactions between NS hydrosols and soil (sand) is, however, confused by the limited availability of experimental evidence concerning undrained static flow and large strain behavior. The contributions, presented in this paper, advance the knowledge through experimental testing, molecular modelling, and micro-analytical measurements. Four grades of colloidal NS (1–15 wt.%) were synthesized for grouting medium-dense sub-angular fine siliceous sand specimens. Consolidated-undrained triaxial compression testing was performed on the base and treated sand for isotropic consolidation over the effective stress range 100–400 kPa. Overall, silica impregnation produced improvements in yield and residual undrained shear strengths, restricted unwelcomed impacts of excess pore water pressure, and led to the formation of generally more dilative, strain-hardening behavior. Steady states and static flow potential indices are also studied as functions of confinement level and viscosity of the NS grout

A Probabilistic Approach to the Spatial Variability of Ground Properties in the Design of Urban Deep Excavation

Uncertainty in ground datasets often stems from spatial variability of soil parameters and changing groundwater regimes. In urban settings and where engineering ground interventions need to have minimum and well-anticipated ground movements, uncertainty in ground data leads to uncertain analysis, with substantial unwelcomed economical and safety implications. A probabilistic random set finite element modelling (RSFEM) approach is used to revisit the stability and serviceability of a 27 m deep submerged soil nailed excavation built into a cemented soil profile, using a variable water level and soil shear strength. Variation of a suite of index parameters, including mobilized working loads and moments in facing and soil inclusion elements, as well as stability and serviceability of facing and the integrated support system, are derived and contrasted with field monitoring data and deterministic FE modelling outputs. The validated model is then deployed to test the viability of using independent hydraulic actions as stochastic variables as an alternative to dependent hydraulic actions and soil shear strength. The achieved results suggest that utilizing cohesion as a stochastic variable alongside the water level predicts system uncertainty reasonably well for both actions and material response; substituting the hydraulic gradient produces a conservative probability range for the action response only

Effect of Grain Size and Shape on Undrained Behaviour of Sands

The stress–strain and stress path characteristics of sands are influenced by their grain size, shape, and packing. Morphological characteristics and size of particles play important role on the undrained shear strength of sands. Often, effects of these parameters are complex and cannot be easily distinguished. This study advances the knowledge of the role of particle size and shape on the undrained shear strength of sands. To eliminate the consequence of morphological characteristics, two sands with different particle sizes but similar angularity, and another sand with different roundness were selected for the study. These morphological characteristics for all three sands were determined from the analysis of scanning electron microscope images. F131 sand with higher median grain size and lower shape factors (rᵣ and rₛ) had highest undrained peak shear strength and phase transformation value. Undrained strength (qₚₜ) and effective principal stress (P′ₚₜ) in phase transformation point had direct relationship with grain median grain size (D₅₀) and inversely effect of shape factor (rᵣ and rₛ). F131 and F161 sands represented highest peak and ultimate steady-state strengths, respectively. Flow potential appeared to be directly proportional with (rᵣ and rₛ) and inversely with D₅₀. The peak index decreased with increasing shape factors (rᵣ and rₛ)